LEGACY PRODUCT

Borrego+ 8×4 and 8×8

DISCONTINUED

Borrego+™ 4×8 and 8×8 Component Video, Digital Audio, L+R Analog Audio Matrix

    Borrego+ Product Cut Sheet

    Borrego+ Integrator Guide

    The Borrego+ matrix switch is an 8 input matrix with 4 or 8 outputs, designed for switching and distributing high definition video and digital and analog audio throughout the home. The Borrego+ features a preamp section to allow volume, bass and treble control of the analog audio, which can then be fed directly into multizone amplifiers for whole house audio. This allows the centralization of all AV source equipment, and allows those sources to be shared throughout the home.

     

    The Borrego+ is like having three independent matrix switches in one unit. Component video, digital audio/composite video, and the analog audio can all be controlled separately, allowing for maximum flexibility.

     

    Those familiar with the existing Borrego will feel right at home with the Borrego+. Legacy IR codes and serial codes are supported, and when you are ready to use the advanced features of the Borrego+, the new V2 serial commands make integration even easier. Serial commands can be sent as fast as you want, or even grouped. Powerful time based commands can create smooth audio fades to avoid abrupt changes in volume. New features such as multiple mute modes, 10 editable memories, and discrete IR zone volume commands make the Borrego+ a powerful asset to any project.

    Rear Panel View

    Features

     

    • Component video (YPbPr)
    • Left and right analog audio
    • Volume, Bass, and Treble for each output
    • Digital audio (SPDIF coax), doubles as composite video matrix
    • Full non-blocking matrix – all outputs can display the same signal or different signals
    • Independent audio and video switching – digital and analog audio can be switched independently
    • NeoTouch™ front panel – no moving parts to jam
    • Mutliple control inputs – RS-232, USB, IR detector (front) and wired IR (rear)
    • Highly visible Vacuum Fluorescent Display (VFD)
    • 16 memories for storing and recalling switcing commands
    • Variable duration fade up/down
    • Discrete volume up/down IR codes for each zone
    • Front panel lockout and blackout
    • Black rack mount kit included (silver on request)
    • Black or silver chassis with choice of black or white front panel
    • IR codes available in several formats for easy integration

     

    Specifications

     

    • Power Inlet: IEC 320-C14
    • Input Voltage: 90-240VAC 50-60Hz, 13W typical
    • Dimensions: Width: 17” Height: 3.45” Depth 10.5” (not including removable feet)
    • Weight: 12 lbs
    • Video bandwidth: 140MHz+ (full 1080p)
    • Analog audio bandwidth: 20 Hz to 20KHz
    • Digital audio modes: PCM, LPCM, Dolby, DTS
    • Digital audio/C-video bandwidth: 20MHz
    • RS-232: 115.2K baud, full two way protocol
    • USB: Slave device, Windows driver included, installs as virtual COM port at 115.2K baud
    • Rear IR: 3.5mm mono jack for 5V or 12V unmodulated blaster input, polarity insensitive