CAT5 Receivers

Eagle™ Cat5 Active Receiver Modules

Eagle Quick Start Guide

The NeoPro Eagle™ is a great new addition to NeoPro’s line of CAT5 video products. The Eagle receives CAT5 from all of our current and past CAT5 video switches such as the Tahoe, and converts to HDMI for easy connection to almost any display. The Eagle can also control the power of the display via CEC bus over the HDMI cable, or via IR emitter. This amazing feature will save your installer time and money by eliminating the costly second cable just for IR, and all the IR automation gear, just for turning on and off the TV everyday. Even more innovative than that, is that the Eagle has a magnetic base. Just click onto the TV’s wall mounting bracket and you’re done!

Features

 

  • Backwards compatible with all NeoPro CAT5 matrix switches.
  • Mix and match your system design with the Raptor passive receiver and the Falcon active receiver.
  • The Eagle requires no local wall wart, power over NeoPro CAT5 from the switch.
  • HDMI-CEC power control of TV.
  • IR power control of the TV.
  • Upload custom IR codes for your device, or choose from built in library.
  • Magnetic base for easy attachment to any steel mounting bracket.

 

Specifications

 

  • SKUs: Eagle (67-00075)
  • Power (from matrix switch): 1W
  • Video Bandwidth: 140MHz
  • Dimensions (Falcon-SM) – 4″ x 2.5″ x 1″
  • Supports 480p through 1080p
  • Max distance from switch – 200 feet
  • Service port – USB serial, 115.2Kbps
  • CEC/IR mode – dip switch selectable
Raptor™ Cat5 Passive Receiver Modules

The Raptor is an innovative receiver module for conversion from Cat5 to unbalanced RCA outputs. The Raptor has three signal pathways for high definition component video. The receiver features a passive circuit that will ensure peak performance at up to 125′ of Cat5e cables. The receiver can be powered by a single Cat5 cable.

Features

 

  • HD component video (YPbPr) up to 125′
  • No local power supply needed
  • Single Gang Decora or surface mount box
  • Paintable wall plate (in wall)- Labels can be applied after finish

 

Specifications

 

  • SKUs: Raptor-IW – in wall single gang decora kit, Raptor-SM – Surface Mount metal chassis
  • Power (none)
  • Video Bandwidth: 140MHz
  • Dimensions (Raptor-SM) – Width including flanges: 4.8″, Height: 1.4″, Depth: 2.0″
Hornet™ Cat5 active receiver modules

Hornet product cut sheet

Hornet-IW Installer’s Guide

Hornet-SM Installer’s Guide

The Hornet is an innovative receiver module for conversion from Cat5 to unbalanced RCA outputs. The Hornet has six signal pathways, three for high definition component video, two for analog stereo, and one for composite video or digital audio. The receiver features a patented automatic equalization circuit that will ensure peak performance at up to 1000’ of Cat5e cables. The Hornet is completely powered by the matrix switch unit, so local power supplies are never needed. In addition the receiver can be powered by a single Cat5 cable in the case that audio is not required in the zone.

 

When used with the Concord, two Cat5e cables may be used to each Hornet. When used with the Delano, only a siongle Cat5e cable is required to send component video to a Hornet. When the delano and Eureka are used together, one Cat5e cable will come from each matrix unit.

Features

 

  • HD component video (YPbPr) up to 1000’
  • Left and Right stereo audio
  • Composite video or digital audio (SPDIF)
  • Automatic equalizer for cable length compensation
  • No local power supply needed
  • Single Gang Decora or surface mount box
  • Paintable wall plate (in wall)- Labels can be applied after finish

 

Specifications

 

  • SKUs: Hornet-IW – in wall single gang decora kit, Hornet-SM – Surface Mount metal chassis
  • Power (from matrix switch): 1.5W with HD video only, 2.5W with both HD video and audio
  • Video Bandwidth: 140MHz
  • SPDIF/Composite bandwidth: 20MHz
  • L+R Audio bandwidth: 20-100KHz
  • Dimensions (Hornet-SM) – Width including flanges: 4.8″, Height: 1.4″, Depth: 2.0″