LEGACY PRODUCT

Imperial

DISCONTINUED

Imperial™ 12×8 Stackable Component Video Matrix

The Imperial is a 12 input, 8 output component video matrix switch with input pass through connections. The pass through connections are high bandwidth buffered copies of all the input signals, before the matrix switch. These pass throughs can be used to connect to an additional matrix, adding another 8 outputs. Up to 12 Imperials can be stacked to create a full non-blocking 12×96 matrix.

 

The ideal application for the Imperial is in sports bar or similar retail environments where a large number of displays are required. Typically with these systems audio is handled separately, as you would not want 48 displays all with their own volume control. The usual installation would probably have only 4 to 8 zones of audio, therefore a separate multichannel amp system can be used.

Rear Panel View

Features

 

  • Component video (YPbPr)
  • Full non-blocking matrix – all outputs can display the same signal, or different signals.
  • NeoTouch™ front panel – no moving parts to jam.
  • Multiple control inputs – RS-232, USB, IR detector (front) and wired IR (rear)
  • Highly visible Vacuum Fluorescent Display (VFD)
  • 16 memories for storing and recalling switcing commands
  • Front panel lockout and blackout
  • Black rack mount kit included (silver on request)
  • Black or silver chassis, both with black front panel
  • IR codes available in several formats for easy integration

 

Specifications

 

  • Power Inlet: IEC 320-C14
  • Input Voltage: 90-240VAC 50-60Hz, 9W typical
  • Dimensions: Width: 17” Height: 3.45” Depth 10.5” (not including removable feet)
  • Weight: 12 lbs
  • Video bandwidth through matrix section: 140MHz+ (full 1080p)
  • Video bandwidth pass throughs: +/- 0.8 dB over 150MHz
  • Video bandwidth through 6 units: +/- 1 dB over 140MHz
  • RS-232: 115.2K baud, full two way protocol
  • USB: Slave device, Windows driver included, installs as virtual COM port at 115.2K baud
  • Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive