LEGACY PRODUCT

Riverside

DISCONTINUED

Riverside+™ – 12×16 Digital and Analog Audio Matrix

The Riverside+ is a 12 input audio matrix switch with 16 zone outputs, designed to be the central distribution point for all your audio needs in a home or business. Using the Riverside+, one can connect up to 12 centralized sources of audio, and create up to 16 zones of audio with volume, bass, and treble control. Combined with a multichannel amp, the Riverside+ makes a complete multi-room audio solution, ready to be controlled by the IR remote or touch panel control system of your choice.

 

The Riverside+ uses easy to install Cat5 cables for the output runs to each room. At each room location, a Hornet receiver (balun) is then used to convert the Cat5 back into RCA connectors. The Hornet is available as in-wall or surface mount.

Rear Panel View

Features

 

      • 12 inputs of stereo analog audio
      • 16 outputs of stereo analog audio with volume, bass, and treble for each output
      • 12 inputs and 16 outputs of SPDIF digital audio (independent of analog)
      • Full discrete IR codes for up/down/mute for each zone
      • Full non-blocking matrix – all outputs can listen to the same signal, or different signals.
      • NeoTouch™ front panel – no moving parts to jam.
      • Mutliple control inputs – RS-232, USB, IR detector (front) and wired IR (rear)
      • Highly visible Vacuum Fluorescent Display (VFD)
      • 16 memories for storing and recalling switcing commands
      • Front panel lockout and blackout
      • Rack mount kit included
      • Black or silver chassis, both with black acrylic front panel
      • IR codes available in several formats for easy integration
Specifications

 

      • Power Inlet: IEC 320-C14
      • Input Voltage: 90-240VAC 50-60Hz, 50W max, 35W typical
      • Dimensions: Width: 17” Height: 3.45” Depth 10.5” (not including removable feet)
      • Weight: 12 lbs
      • Audio Bandwidth: 20Hz-20KHz +/- 3dB
      • Audio Gain: @Volume 0 = -90dB, @Volume 99 = 0dB
      • RS-232: 115.2K baud, full two way protocol
      • USB: Slave device, Windows driver included, installs as virtual COM port at 115.2K baud
      • Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive