LEGACY PRODUCT

Concord+ 8×8

DISCONTINUED

Concord+™ 8×8 Component Video, Digital Audio, L+R Analog Audio Matrix with Cat5 outputs

Concord product cut sheet

Concord Integrator’s Guide

Hornet Integrator’s Guide

The Concord+ is an 8 input matrix switch with 8 outputs utilizing Cat5 cables to feed high definition video, digital and analog audio. Optionally, the digital audio section can be used for switching composite video.

 

The Concord+ matrix switch will transmit a 1080i/p signal over two Cat5 cables up to 1000 feet away. The Hornet™ single gang decora in wall receiver will automatically detect the cable length and use NeoPro’s patented self adjusting equalizer to compensate for cable losses.

Rear Panel View

Concord+ Matrix Features

 

  • Component video (YPbPr)
  • Left and right analog audio
  • Volume, Bass, and Treble for each output
  • Digital audio (SPDIF coax), doubles as composite video matrix
  • Full non-blocking matrix – all outputs can display the same signal or different signals
  • Independent audio and video switching – digital and analog audio can be switched independently
  • NeoTouch™ front panel – no moving parts to jam
  • Mutliple control inputs – RS-232, USB, IR detector (front) and wired IR (rear)
  • Highly visible Vacuum Fluorescent Display (VFD)
  • 16 memories for storing and recalling switcing commands
  • Front panel lockout and blackout
  • Black rack mount kit included (silver on request)
  • Black or silver chassis with choice of black or white front panel
  • IR codes available in several formats for easy integration
Hornet Receiver Features (sold separately)

 

  • Single gang Decora style module
  • No local power needed – power comes from the Concord
  • Auto-adjusting equalizer for a quick and reliable installation
  • Paintable wall plate – Labels are applied after finish
Specifications

 

  • Power Inlet: IEC 320-C14
  • Input Voltage: 90-240VAC 50-60Hz, 45W typical
  • Dimensions: Width: 17” Height: 3.45” Depth 10.5” (not including removable feet)
  • Weight: 12 lbs
  • Video bandwidth: 140MHz+ (full 1080p)
  • Analog audio bandwidth: 0 Hz to 200KHz
  • Digital audio modes: PCM, LPCM, Dolby, DTS
  • Digital audio/C-video bandwidth: 20MHz
  • RS-232: 115.2K baud, full two way protocol
  • USB: Slave device, Windows driver included, installs as virtual COM port at 115.2K baud
  • Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive